Search:

Identifying a roof leakage

Work on days when rain is not expected, and in temperatures of 65 to 75 deg. F. for comfort. The curing process requires an ambient temperature of between 55 deg. F to 140 deg. F. As an estimate, you will need about 3 to 6 hrs to apply Liquid Rubber EPDM on a flat (horizontal) surface of 240 sq.ft.
To apply a roofing material you first need to inspect your roof
Roof inspection: Stay Off the Roof - It is generally not a good idea to get up on your roof to inspect it. Why? Basically for two reasons. First, roofs are dangerous because they are high, steep and you could slip and fall. Metal roofs are especially slippery. Other roofs can be slick too - particularly when they are wet or are covered in leaves, snow or ice. Second, many roofing materials shouldn't be walked on because this can damage them. Even flat roofs can be damaged by patio furniture and foot traffic. To enjoy a rooftop deck you will need to have decking properly installed.
To inspect your roof you can either look at it through binoculars from the ground, or use a ladder for an up close look. From inside your attic you can also look for water stains that would indicate that your roof is leaking. Getting a professional opinion is a good idea as well. Roofing contractors from Renovation Experts can inspect your roof for you to properly diagnose its status. However, before you do that, here are some things that you can look for if you have asphalt or a wood shingled roof:

Article Source: http://www.articlepyramid.com

www.epdmcoatings.com www.buyliquidroof.com

Please Rate this Article

Not yet Rated